Others
Troubleshooting
Symptom | Cause and Remedy | ||
The projector cannot be | • If the Firewall is installed in the computer, communications | ||
detected. |
| with the Projector Station for Air Shot Version 2 may be | |
The projector cannot be |
| blocked, which may cause an irregularity; the projector | |
connected. |
| cannot be detected or connected, or the projector is | |
The projector is disconnected |
| disconnected in midway. | |
in midway. |
| c Set the Firewall so that the following port numbers | |
|
| ||
|
| Projector Station for Air Shot Version 2 uses will not be | |
|
| blocked. For how to set the Firewall, see the manual of the | |
|
| Firewall software you use. | |
|
| Port numbers that Projector Station for Air Shot Version 2 | |
|
| uses: | |
|
| - 51217 (TCP/UDP) | |
|
| - 53125 (TCP/UDP). | |
|
|
|
|
|
| Note |
|
|
| If you release the block carelessly, the computer becomes unguarded | |
|
| and may be suffered by a dangerous virus attack. Consult with the | |
|
| network administrator and pay special attention to firewall setting. | |
|
| Allow the communication for only the necessary ports. | |
| • The network segment (subnet) of the computer and the | ||
|
| projector are different. | |
|
| c Set the PC Registration List (page 10) on the projector and | |
|
| [Projector Setting] window (page 18) on the computer. | |
| • The check box of [Use USB Wireless LAN Module as | ||
|
| Simple Mode] on [Option Setting], [Basic Setting] tab is | |
|
| checked. | |
|
| c This function is not used for this model. Remove the check. | |
| • [Standby Mode] in the Function menu of the projector is not | ||
|
| set to [Standard]. | |
|
| c Set to [Standard]. | |
|
|
|
|
The computer is not displayed | • Projector Station for Air Shot Version 2 is not installed in the | ||
in the PC list. (Projector) |
| computer nor started. | |
|
| c Install it. | |
|
| c Start Projector Station for Air Shot Version 2. | |
| • The network cable is not connected to the projector. | ||
|
| c Connect the network cable to the NETWORK connector of | |
|
| the projector. | |
| • The network segment (subnet) of the computer and the | ||
|
| projector are different. | |
|
| c Set the PC Registration List (page 10) on the projector and | |
|
| [Projector Setting] window (page 18) on the computer. | |
| • The network setting of the projector or computer is not set | ||
|
| correctly. | |
|
| c Check that the network setting is the same as that of the | |
|
| connected equipment. | |
|
|
|
|
24 Others