3 Install the software according to the “wizard” within the installer.

When you use Windows XP Service Pack 2/Vista and the following dialog box appears during installation, check the [Register automatically] radio button and click [Next].

The [Autoconfiguration done] appears after the installation is completed.

4 To go on projecting the pictures, check the [Start Air Shot v2 and connect to Projector] check box and click [OK].

With the check, the Projector Station for Air Shot Version 2 starts up automatically.

When you are not going to project the pictures, click [OK].

Starting from the hard disk or external memory without installing Projector Station for Air Shot Version 2 into the computer

1 Install the external memory (“Memory Stick”, USB memory, etc.) into the computer.

It is not necessary to copy it to the hard disk.

2 Put the supplied CD-ROM into the CD-ROM drive of the computer. When the application software installation window appears, press the Exit button to exit it.

3 Open [My computer], then put the cursor on [CD-ROM drive] and right- click.

When the item list appears, select [Open (O)].

4 Copy the folder of [PjStation for Air Shot v2] to the hard disk or external memory.

5 Execute [AutoConfig.exe].

When you use Windows XP SP2/Vista

If the following window appears in the middle of the operation, check the [Register automatically] radio button and click [Next].

[Autoconfiguration done] appears after the installation is completed.

To continue projecting the pictures, check the [Start Air Shot v2 and connect to Projector] check box and click [OK].

6 Preparation