Turn off the power and unplug the power cord.

Notes

•Be sure to use the LMP-F250 Projector Lamp for replacement. If you use lamps other than LMP-F250, the projector may cause a malfunction.

•Be sure to turn off the projector and unplug the power cord before replacing the lamp.

•Do not put your hands into the lamp replacement spot, or not fall any liquid or object into it to avoid electrical shock or fire.

Disposal of used projector lamp

As the materials used in this lamp are similar to those of a fluorescent lamp, you should dispose of a used projector lamp in the same way as a fluorescent lamp.

Maintenance

Cleaning the Air Filter

The air filter should be cleaned every 300 hours. When it becomes difficult to remove the dust from the filter, replace the filter with a new one.

To clean the air filter, follow the steps below:

1

2 Raise the side of the projector, and pull out the air filter.

3 Remove the dust from the filter with a vacuum cleaner.

4 Insert the air filter all the way in utnil it is securely in place.

Notes

•If you neglect the air filter, dust may accumulate, clogging it. As a result, the temperature may rise inside the unit, leading to a possible malfunction or fire.

•Be sure to insert the air filter firmly; the power will not be turned on if it is not closed securely.

Maintenance

31 (GB)