Features

Features

High brightness, high picture quality

• High brightness

The high aperture ratio LCD panel with a microlens and the 250 W UHP lamp provide high brightness (light output 3500 ANSI lumen) and excellent uniformity on the picture.

•High resolution

By adopting three 1.3-inch, approximately 790,000- pixels XGA panels, this projector can project sharp picture with the resolutions of 1024 ⋅ 768 pixels for RGB input, and 750 horizontal TV lines for video input.

•High picture performance

The DDE (Dynamic Detail Enhancer) technology, newly and originally developed by Sony, enables converting interlace format video signal to progressive format, allowing you to obtain a detailed picture. The technology also reproduces the film sources in 2-3 Pull-Down format with smooth picture movement.

The internal RGB enhancer provides sharper RGB pictures. The 10-bit 3D Digital Gamma correction for good picture uniformity is also provided.

Convenient and flexible setup

•Power zoom/power focus lens and the lens shift function

The projector is equipped with a 1.3-times power zoom and power focus lens, which allows you to change the size of the projected image without having to move the projector. The lens shift function enables you to install the projector in a wide range of locations, without worrying about trapezoid distortion. Also, three optional lenses are available for the projector, depending on your setup condition.

• Center positioned lens

The projector is designed to locate the lens in the center of the unit. This enables an easy setup, as the lens center aligns with the center of the screen.

• Tilt installation (in front and rear)

You can install the projector by tilting it 90 degrees at the rear or 90 degrees in front. You can use a mirror for rear projection.

• Twin stack installation

Thanks to the lens shift function, two projectors can be stacked, which improves the brightness of the image.

Multi scan compatibility

• DVI and 5BNC connectors

The projector has the DVI (Digital Visual Interface) connector, the up-to-date digital input connector, which allows you to connect to the digital or analog RGB equipment equipped with the DVI output. The 5BNC input connectors allow you to connect to workstation output high-resolution signals and to connect to a computer from a long distance.

The projector has 44 preset data for input signals in the memory, which allows you to project a clear picture on the screen simply by connecting equipment and pressing the APA (Auto Pixel Alignment) key.

• Accept various input signals

The projector accepts video signals of the composite, S video and component, and can also display the 15k RGB, DTV, HDTV, VGA1), SVGA1), XGA1), SXGA1) and UXGA1) (fV=60 Hz) signals.

• Scan converter built-in

The projector has a built-in scan converter which converts the input signal within 1024 ⋅ 768 pixels.

• Compatible with six color systems

NTSC 3.58, PAL, SECAM, NTSC 4.432), PAL-M or PAL-N color system can be selected automatically or manually.

Other function

• Networking compatibility

The projector is equipped with a PC CARD slot and ETHER connector, which allows you to connect to a wired or wireless LAN.

For information on the networking function of this projector, refer to the supplied Operating Instructions for Networking.

.........................................................................................................................................................................................................

1)VGA, SVGA, XGA, SXGA and UXGA are registered trademarks of the International Business Machines Corporation, U.S.A.

2)NTSC4.43 is the color system used when playing back a video recorded on NTSC on an NTSC4.43 system VCR.

8 (GB)