Sony VPL-FX50 Optical characteristics, Electrical characteristics, Input/Output, Specifications

Specifications

Specifications

Optical characteristics

Projection system	3 LCD panels, 1 lens, projection
	system
LCD panel	1.3-inch TFT SONY LCD panel
	with micro-lens array,
	2,359,296 pixels
	(1024 ⋅ 768 pixels ⋅ 3)
Lens	Approx. 1.3 times power zoom/
	focus lens
	f 50.8 to 64.0 mm/F 1.7 to 2.0
Lamp	250 W UHP
Projection picture size
	Range: 40 to 300 inches (diagonal
	measure)
Light output	ANSI lumen1) 3500 lm

Throwing distance 40-inch: 1490 to 1820 mm (58 3/4 to 71 3/4 inches)

60-inch: 2280 to 2780 mm

(89 7/8 to 109 1/2 inches) 80-inch: 3060 to 3740 mm

(120 1/2 to 147 3/8 inches) 100-inch: 3850 to 4700 mm

(151 5/8 to 185 1/8 inches) 120-inch: 4630 to 5660 mm

(182 3/8 to 222 7/8 inches) 150-inch: 5810 to 7100 mm

(228 7/8 to 279 5/8 inches) 180-inch: 6990 to 8540 mm

(275 1/4 to 336 3/8 inches) 200-inch: 7770 to 9500 mm

(306 to 374 1/8 inches)

250-inch: 9740 to 11900 mm (383 5/8 to 468 5/8 inches)

300-inch: 11700 to 14300 mm (460 3/4 to 563 1/8 inches)

Electrical characteristics

Color system	NTSC3.58/PAL/SECAM/NTSC4.43/
	PAL-M/PAL-N system,
	switched automatically/manually
Resolution	750 horizontal TV lines (Video

input)

1024 ⋅ 768 pixels (RGB input) Acceptable computer signals

fH: 15 to 91 kHz

fV: 43 to 85 Hz

Input/Output

VIDEO IN	VIDEO: BNC type
	Composite video: 1 Vp-p ± 2 dB
	sync negative (75 ohms
	terminated)
	S VIDEO: Y/C mini DIN 4-pin
	type (male)
	Y (luminance): 1 Vp-p ± 2 dB
	sync negative (75 ohms
	terminated)
	C (chrominance): burst
	0.286 Vp-p ± 2 dB (NTSC)
	(75 ohms terminated),
	burst 0.3 Vp-p ± 2 dB (PAL)
	(75 ohms terminated)
VIDEO OUT	VIDEO: Loop-through BNC type
	Loop-through output from the
	VIDEO IN connector
	S VIDEO: Loop-through mini DIN
	4-pin type (male)
	Loop-through output from the S
	VIDEO IN connector
INPUT A	Analog RGB/component: 5BNC
	(female)
	R/R-Y: 0.7 Vp-p ± 2 dB (75
	ohms terminated)
	G: 0.7 Vp-p ± 2 dB (75 ohms
	terminated)
	G with sync/Y: 1 Vp-p ± 2 dB
	sync negative (75 ohms
	terminated)
	B/B-Y: 0.7 Vp-p ± 2 dB (75
	ohms terminated)
	SYNC/HD:
	Composite sync input: 1-5 Vp-p
	high impedance, positive/
	negative
	Horizontal sync input: 1-5 Vp-p
	high impedance, positive/
	negative
	VD:
	Vertical sync input: 1-5 Vp-p
	high impedance, positive/
	negative
INPUT B	Digital/Analog RGB: DVI-I
	(TMDS)
INPUT C	ETHER
	10BASE-T/100BASE-TX
	standard
	PC CARD slot
	PC card slot Type II

.........................................................................................................................................................................................................

1) ANSI lumen is a measuring method of American National Standard IT 7.228.

34 (GB)