LIGHT | INPUT | Flashes in green for |
|
| |
|
| a few seconds, and |
DYNAMIC | STANDARD CINEMA | then lights in green. |
|
|
LIGHT INPUT
DYNAMIC STANDARD CINEMA
Tips
The ON/STANDBY indicator flashes in green, and then lights in green. When the ON/STANDBY indicator flashes, “Starting...” appears on the screen.
3 Turn on the equipment connected to the projector.Refer to the operating instructions of the connected equipment.
4 Press INPUT to project the picture on the screen.Each time you press the button, the input indication and equipment to be projected change. (1 page 28)
•You can select the desired language for the menu screen. For details, refer to “Step 4: Selecting the Menu Language”. (1 page 25)
•When “Auto Input Search” is set to “On” in the Function 
menu, the input terminal with effective signals is automatically displayed by pressing INPUT. (1 page 49)
| ENTER |
|
LENS | ADJ PIC | MENU |
Press the LENS button repeatedly until the Lens Shift adjustment window (test pattern) appears. Then select the proper vertical position by pressing the M/m/ </, buttons. Each time you press the LENS button, the LENS adjustment window appears in order.
To move the position upward, press M/,.
To move the position downward, press m/<.
Tip
When “Lens Control” is set to “Off” on the Installation 
menu, you cannot adjust the vertical picture position. (1 page 50)
When “Test Pattern” is set to “Off” on the Function 
menu, the test pattern is not displayed. (1 page 49)
22