Sony VPL-VW50 manual 47

Setup Menu

The Setup menu is used to change the factory preset settings, etc.

		Menus the Using
Status	Sets whether or not the on-screen display is displayed.
	Set to “Off” to turn off the on-screen displays except for the menus,
	message when turning off the power, and warning messages.
Language	Selects the language used in the menu and on-screen displays.
	Available languages are: English, Dutch, French, Italian, German,
	Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese,
	Chinese (Simplified Chinese), Chinese (Traditional Chinese),
	Korean, Thai and Arabic.
Cooling Setting	Use this item when using the projector at high altitudes.
	High: Use this setting when using the projector at an altitude of
	1,500 m or higher.
	Standard: Use this setting when using the projector at normal
	altitudes.
	Note
	When this item is set to “High”, the number of turns of the fan
	increases, and the fan noise becomes slightly louder.
Standby Mode	Lowers the power consumption in standby mode.
	When set to “Standard” the power consumption in standby mode
	becomes normal.
	When set to “Low”, the power consumption in standby mode is
	lowered.
Power Saving	Sets the power saving mode.
	When set to “On”, the projector goes into power saving mode if no
	signal is input for 10 minutes. At that time, the ON/STANDBY
	indicator lights in orange, then the screen becomes dark. In power
	saving mode, the power saving mode is cancelled if a signal is input
	or any button is pressed. If you do not want to set the projector to
	power saving mode, select “Off”.

47