Making Fine Adjustments to the Horizontal Picture Position

Tools you need to get startedPhillips screwdriver: 110 mm (4 3/8 inches) or longerFlat-head screwdriver: 110 mm (4 3/8 inches) or longer

Note

For details on how to make fine adjustments of the horizontal picture position, consult with qualified personnel. When the lens is scratched, there is a charge for repair.

Also, do not look into the lens while you are adjusting the picture position.

You can adjust the lens position right or left by about 1 mm from the center of the lens.

1 Remove the ring (washer) attached around the lens by turning it counterclockwise.

2 Loosen the four screws located at the position indicated with an arrow by turning them counterclockwise with a Philips screwdriver.

Others

75