Information Menu
The Information menu displays the model name, serial number, the horizontal and vertical frequencies of the input signal and the cumulated hours of usage of the lamp.
Model name:
Serial No.
Memory No.
Signal type
Model name | Displays the model name |
|
|
fH (horizontal frequency) | Displays the horizontal frequency of the input signal. |
|
|
fV (vertical frequency) | Displays the vertical frequency of the input signal. |
|
|
Memory No. | Displays the preset memory number of the input signal. |
|
|
Signal type | Displays the type of the input signal. |
|
|
Lamp Timer | Indicates how long the lamp has been turned on (total usage). |
|
|
Notes
•fH (horizontal frequency) and fV(vertical frequency) may not be displayed depending on the input signal used on the projector.
•You cannot change the displays listed above.
About the Preset Memory No.
This projector has 39 types of preset data for input signals (the preset memory). When the preset signal is input, the projector automatically detects the signal type and recalls the data for the signal from the preset memory to adjust it to an optimum picture. The memory
number and signal type of that signal are displayed in the Information 
menu.
You can also adjust the preset data through the Screen 
menu.
This projector also has 20 types of user memories for
When an unpreset signal is input for the first time, a memory number is displayed as 0.
When you adjust the data of the signal in the Screen 
menu, it will be registered to the projector. If more than 20 user memories are registered, the newest memory always overwrites the oldest one.
See the chart on page 63 to find if the signal is registered to the preset memory.
Note
When the aspect ratio of input signal does not match the screen size, a part of the screen is displayed in black.
52