Screen Menu

The Screen menu is used to adjust the input signal. You can adjust the size of the picture, and select wide screen mode, etc.

.

Adjust Screen menu

Menus the Using

Wide Mode (When the You can set the aspect ratio of the picture to be displayed for the image input signal is current input signal. This item is enabled only when an image signal

input)(preset memory numbers 1 to 14) is input.

Wide Zoom: A 4:3 aspect ratio picture is enlarged and the upper and lower portions of the picture are compressed to fit the 16:9 screen. Use this mode to view news, variety shows, etc.

Normal: A picture with normal 4:3 aspect ratio is displayed in the center of the screen to fill the vertical screen size.

Full: A picture squeezed to 4:3 is displayed with the correct aspect ratio. A 4:3 picture is enlarged horizontally to fit the 16:9 screen.

Zoom: A normal 16:9 aspect ratio picture is enlarged vertically and horizontally in the same ratio to fill the screen.

Wide Mode (When the You can set the aspect ratio of the picture to be displayed for the

PC signal is input) current input signal. This item is enabled only when an PC signal is input.

Full 1: Displays a picture on the whole of the screen without changing the aspect ratio of the original picture.

Full 2: Displays a picture on the whole of the screen.

Zoom: A normal 16:9 aspect ratio picture is enlarged vertically and horizontally in the same ratio to fill the screen.

Over Scan

Hides the outline of the picture.

 

 

On: Hides the outline of the input picture. Select this setting when noise

 

appears along the edge of the picture.

 

 

Off: Projects the whole of the input picture.

 

Tip

 

 

To display the displayable region within the four directions of the screen,

 

refer to “Blanking” on the installation

menu (1 page 51).

45