Sony UWP-X7, X8 MIC, The, LINE, position, Front side, Bottom side, INPUT selector, Display section, level) indicator, dDisplay section, Audio input level

Plug-on transmitter (UTX- P1)

Front sideBottom side

aAudio input connector (XLR type) Connect a microphone or a line output connector of an audio mixer, etc.

bAF/PEAK (audio frequency/peak

level) indicator

Turns on or off according to the audio input level as follows.

Audio input level	INPUT selector
	position
	MIC	LINE
+8 dBV or more	—	On (red)
–9 dBV or more	—	On
and less than +8		(green)
dBV
Less than –9 dBV	—	Off
–40 dBV or more	On (red)	—
–60 dBV or more	On	—
and less than –40	(green)
dBV
Less than –60 dBV	Off	—

cINPUT (input signal) selector

Set this selector to MIC when a microphone is connected to the audio input connector; set it to LINE when an audio mixer, etc. is connected to the audio input connector.

Notes

•The UTX-P1 does not support external power supply. Do not connect a microphone which requires external power supply.

•Do not set the INPUT selector to MIC position while the audio signal is being input from the audio mixer, etc. Doing so may cause excessive audio input, resulting in distorted playback or recorded sound or damage to the playback or recording equipment.

dDisplay section

The channel indication (D) for U30 model is shown.

38 Parts Identification