Attaching the supplied accessory to the hand-held microphone (UTX-H2)

To attach the microphone holder

Insert the bottom part of the microphone into the holder.

Attaching the optional accessory to the plug-on transmitter (UTX-P1)

To attach a microphone or a cable

Microphone or cable connector

Push the microphone or cable connector (XLR-3-12C connector) against the audio input connector of the UTX-P1 until it clicks into place.

Inserting the plug-on transmitter (UTX-P1) into the supplied soft case

Insert the UTX-P1 into the supplied soft case with the rear side up, and close the flap.

To detach a microphone or a cable

Microphone or cable connector

Release button

Press the release button and pull off the microphone or cable slowly.

46 Attachment and Installation Procedures