Sony UWP-X7, X8 To attach the belt clip, To remove the belt clip, To attach the holder clip to the microphone, To attach the wind screen to the microphone

To attach the holder clip to the microphone

Push the holder clip against the bottom of the microphone until the holder clip clicks into place.

To take the slack out of the microphone cable

Run the cable through the clamping part of the holder clip.

To attach the wind screen to the microphone

Insert the microphone into the hole at the bottom of the windscreen.

To attach the belt clip

Insert one end of the belt clip into one of two holes on either side of the transmitter, and then insert the other end into the hole on the other side.

To remove the belt clip

Insert a pointed object such as a ballpoint pen between the belt clip and the transmitter to make some space between them, and then remove the end of the belt clip from the hole on the side of the transmitter.

Attachment and Installation Procedures 45