CD Custom File
Function
With the CD changer connected
When (a) CD changer with custom file function is connected, you can display the customized titles (Disc Memo Function) and play selected tracks (Bank Function) on the discs.
These settings are stored in the memory of the CD changer. Therefore, even if you take a
*If you try to register more than 110 discs, the unit will display the “*Mem Full*” indication and will not
accept the command for
EN will have to erase other discs from the CD changer memory before you enter the new ones.
Putting Your Personalized Titles onto the CDs
— Disc Memo Function
1 Play the disc that you wish to title (page 15).
PTY
2 Press the LIST button for more than two seconds.
Enter the name edit mode.
CD1 ________
3 Press either the 
or 
button to select the desired characters.
CD1 S_______
22
4 Press the SEL button after locating the desired character.
CD1 S_______
The flashing part moves to the next space on the right. Repeat steps 3 and 4 to enter the entire title. Up to eight characters can be used per disc.
Notes
∙If you press the SEL button when the eighth character (farthest right character) is flashing, the flashing part goes back to the first character (farthest left character).
∙If you wish to put a blank space after a character, select “_”
5 A To continue to the put titles onto the discs,
press either side of the PRST/DISC button momentarily to go to another disc.
BTo return to the normal CD playback
mode,
| PTY |
|
— press the | LIST button for more | |
than two seconds. | ||
— press the | MD/CD | button to select |
| ||
the next CD changer (when two or more CD changers are connected).
Displaying the Registered
Titles — Disc Memo Function
Press the DSPL button during CD playback.
CD1 SCHUBERT
Each time you press the DSPL button during CD playback, the display on the display window changes as follows:
$
Elapsed playback time
$
Disc title
$
Clock
Actual total number: | Sony |
