Sony Ericsson DAV-DZ280 Step 3: Performing the Quick Setup, 21GB, 2 Press [/1, 1 Turn on the TV, 4 Press without inserting a disc, 5 Press X/x to select a language, then press

Step 3: Performing the Quick Setup

Follow the Steps below to make the basic adjustments for using the system. Displayed items vary depending on the area.

"/1

C/X/x/c,

DISPLAY

1 Turn on the TV.2 Press [/1.

Note

•Make sure that the function is set to “DVD” (page 24).

3 Switch the input selector on your TV so that the signal from the system appears on the TV screen.

[Press [ENTER] to run QUICK SETUP.] appears at the bottom of the TV screen. If this message does not appear, recall the Quick Setup display (page 23).

4 Press without inserting a disc.

The Setup Display for selecting the language used in the on-screen display appears.

LANGUAGE SETUP

OSD:ENGLISH

MENU:ENGLISH

AUDIO:FRENCH

SUBTITLE:SPANISH

PORTUGUESE

5 Press X/x to select a language, then press .

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

VIDEO SETUP

TV TYPE:	16:9
LINE:	16:9
PAUSE MODE:	4:3 LETTER BOX
	4:3 PAN SCAN

6 Press X/x to select the setting that matches your TV type, then press .

•[16:9]: For a wide-screen TV or a 4:3 standard TV with a wide-screen mode (page 45)

•[4:3 LETTER BOX] or [4:3 PAN SCAN]: For a 4:3 standard TV (page 45)

The Setup Display for selecting the output method for video signals from the EURO AV T OUTPUT (TO TV) jack on the rear panel of the unit appears.

VIDEO SETUP

TV TYPE:	16:9
LINE:	VIDEO
PAUSE MODE:	VIDEO
	RGB

7 Press X/x to select the output method for video signals, then press .

•[VIDEO]: Outputs video signals.

•[RGB]: Outputs RGB signals.

Note

•If your TV does not accept RGB signals, no picture appears on the TV screen even if you select [RGB]. Refer to the operating instructions supplied with your TV.

Started Getting

21GB