Set the [TEST TONE] to [ON].

[CENTER] 0.0 dB*: Set the center speaker level.

[SUBWOOFER] +2.0 dB: Set the subwoofer level.

*This item appears when you set [CENTER] to [YES] in the [CONNECTION] setting.

x[LEVEL (SURROUND)]

You can adjust the sound level of the surround speakers. You can set the parameter from –6.0 dB to +6.0 dB. Be sure to set [TEST TONE] to [ON] for easy adjustment.

[L/R] 0.0 dB*: Set the surround speaker level.

*This item appears when you set [SURROUND] to [YES] in the [CONNECTION] setting.

x[TEST TONE]

The speakers will emit a test tone to adjust [LEVEL (FRONT)] and [LEVEL (SURROUND)].

[OFF]: The test tone is not emitted from the speakers.

[ON]: The test tone is emitted from each speaker in sequence while adjusting the level. When you select one of the [SPEAKER SETUP] items, the test tone is emitted from each speaker in sequence.

Adjust the sound level as follows.

1

2 Press C/X/x/c repeatedly to select the desired speaker and the level.

3 Press .

4 Repeat Steps 1 to 3.5 Press C/X/x/c repeatedly to set [TESTTONE] to [OFF] after adjusting the speaker level.

Tip

To adjust the volume of all the speakers at one time, turn the VOLUME control on the unit, or press VOLUME +/– on the remote.

To return to the default setting when changing a setting, select the item, then press CLEAR. Note that only the [CONNECTION] setting does not return to the default setting.

50GB