Selecting the Effect to Suit the Source

You can select a suitable sound mode for movies or music.

Press SOUND MODE repeatedly during playback until the desired mode appears in the front panel display.

•“AUTO”: The system automatically selects “MOVIE” (the MOVIE indicator lights up) or “MUSIC” (the MUSIC indicator lights up) to produce the sound effect depending on the source.

•“MOVIE”: The system provides the sound for movies. The MOVIE indicator lights up.

•“MUSIC”: The system provides the sound for music. The MUSIC indicator lights up.

Note

•When you play a Super Audio CD, this function does not work.

•You cannot operate these setup items when you connect headphones to the unit.

Changing the Input Level of the Sound from Connected Components

Distortion may occur when you listen to a component connected to the EURO AV T OUTPUT (TO TV) jack on the rear panel, or to the AUDIO IN jack on the front panel. Distortion is not a malfunction and will depend on the component connected.

To prevent distortion, reduce the input level on the unit.

1 Press FUNCTION +/– repeatedly until “TV” or “AUDIO” appears in the front panel display.

2 Press SYSTEM MENU.

3 Press X/x repeatedly until “ATTENUATE” appears in the front panel display, then press or c.

4 Press X/x to select a setting.

•“ATT ON”: You can attenuate the input level. The output level is changed.

•“ATT OFF”: Normal input level.

5 Press .

The setting is made.

6 Press SYSTEM MENU.

The system menu turns off.

Operations Other

73GB