To go back to the menu

Press O RETURN.

•Depending on the VIDEO CD, [Press ENTER] in Step 3 may appear as [Press SELECT] in the operating instructions supplied with the disc. In this case, press H.

Tip

•To play without using the PBC function, press ./ > or the number buttons while the system is in stop mode to select a track, then press H or . The system starts playback. You cannot play still pictures such as a menu. To return to PBC playback, press x twice, then press H.

Resuming playback from the point where you stopped the disc(Resume Play)

When you stop the disc, the system remembers the point where you pressed x and “RESUME” appears in the front panel display. As long as you do not remove the disc, Resume Play will work even if the system is set to standby mode by pressing "/1.

1 While playing a disc, press x to stop playback.

“RESUME” appears in the front panel display.

2 Press H.

The system starts playback from the point where you stopped the disc in Step 1.

•Depending on where you stop the disc, the system may not resume playback from exactly the same point.

•The point where you stopped playing may be cleared when:

–you eject the disc.

–the system enters standby mode (DATA CD/ DATA DVD only).

–you change or reset the settings on the Setup Display.

–you change the parental control level.

–you change the function by pressing FUNCTION +/–.

–you disconnect the AC power cord (mains lead).

•For a DVD-VR, VIDEO CD, Super Audio CD, CD, DATA CD, or DATA DVD, the system remembers the resume playback point for the current disc.

•Resume Play does not work during Program Play and Shuffle Play.

•This function may not work properly with some discs.

Tip

•To play from the beginning of the disc, press x twice, then press H.

To enjoy a disc that you played before with resume playback(Multi-disc Resume)

This system recalls the point where you stopped the disc the last time it was played and resumes playback from that point the next time you insert the same disc. When the resume playback memory is full, the resume playback point for the earliest disc is deleted.

To activate this function, set [MULTI-DISC RESUME] in [SYSTEM SETUP] to [ON]. For details, see “[MULTI-DISC RESUME] (DVD VIDEO/VIDEO CD only)” (page 48).

•This system stores the resume points in memory for up to 10 discs.

Tip

•To play from the beginning of the disc, press x twice, then press H.

32GB