18
Error 650:
The Remote Access
server is not responding
during dial-up
Incorrect User ID and/or password. Re enter correctly.
Error 678:
Computer you are dialing
is not responding during
dial-up
Either: Service is not supported by SIM (usually for
CSD/HSCSD) or the computer is not answering.
1. Check SIM settings with your service provider if
necessary.
2. Make sure that the server you are dialing is OK.
3. Make sure that Analogue mode has not been
selected with 57.6kbps data rate (V110 or V120
mode must be selected and supported by the
network)
Error 720:
No PPP control protocols
Configured during dial-up
The service is not supported by the SIM, usually appears
when you are trying to connect to GPRS Internet. Contact
service provider to enable GPRS Internet access on SIM
card
Windows® 2000
Error 619:
The port is disconnected
during dial-up
An ISDN mode (V110 or V120) has been selected when
creating a connection, but is not supported by the network
Select Analogue mode when creating the connection in
the Connection Wizard.
Error 678:
Computer you are dialing
is not responding during
dial-up
Either: Service is not supported by SIM (usually for
CSD/HSCSD) or the computer is not answering.
1. Check SIM settings with your service provider if
necessary.
2. Make sure that the server you are dialing is OK.
3. Make sure that Analogue mode has not been
selected with 57.6 kbps data rate (V110 or V120
mode must be selected and supported by the
network).
Error 691:
Access denied, user
name and password
incorrect on the domain
during dial-up
The domain name entry is incorrect.
Correct the domain name entry or delete if not required.
Error 718:
The card was unable to
This error indicates a PPP conversation started, but it was
terminated because the remote server did not respond