Note:
If you are unsure which speed to choose from the Speed tab, start with Analogue 9600, and check to see if it works. Once your connection works on Analog, you can try the V110/V120 settings to see if faster speeds are available. V110/V120 also connects faster than analog. When roaming you may need to repeat this procedure to adapt your settings to the capability of the local network operator.
12.Select the Options tab in the Advanced dialog to specify a callback number, if required. Callback is a service that allows the call direction to be reversed. If you want to watch the progress of a callback in a terminal window click the Show Terminal Window After Dialing box.
See Appendix A - GSM Connection Parameters on page 80,
for descriptions of the updateable parameters in the Advanced dialog. Click Apply to save any changes before closing the dialog.
13.If the username and password screen opens you can check and/or enter the username and password required for the connection. Tick the Save Password box if you want the connection to always use this username and password.
If you need to enter the password each time you connect (for example, you read the password from a separate hardware 'password generator') you can enter your username and leave the Save Password box
Note:
Some versions of Windows® deliberately change the number of asterisks that represent a password and place asterisks in the password field when the password is blank in order to make the display secure.
14.Click Finish to create your
Modify a Connection
1.Select Modify a connection. The Select a connection drop down menu is activated. Click on the menu and select the connection you want to modify.
2.Click Next.
3.Change settings as required.
Delete a Connection
1.Select Delete a connection. The Select a connection drop down menu is activated. Click on the menu and select the connection you want to delete.
2.Click Next. The Success screen is displayed. Click Finish to close the Connection Wizard.
Create a GPRS, HSCSD or CSD Connection | 15 |