Windows Error Codes

Windows® 98

Error 619:

An ISDN mode (V110 or V120) has been selected when creating

The port is

a connection, but is not supported by the network.

disconnected

Select Analogue mode when creating the connection in the

during dial-up

Connection Wizard.

 

 

Error 629:

Telephony settings are set to pulse dialling, change to tone dialling.

The port was

 

disconnected

Check the dialling settings for the current location (In Control Panel

by the remote

Phone and Modem Option Dialling Rules Location

machine during

Edit) and change the Dial using setting to tone, or (if Pulse is

dial-up

a necessity), create a new location called GC79 Anywhere and

 

 

set the dialling to Tone. GC79 anywhere locationshould then be

 

used whenever you use the GC79.

 

 

Error 630:

A Dial-up networking connection is already connected.

The port was

Close the connected dial-up and try again.

disconnected

 

due to hardware

 

failure during

 

dial-up

 

 

 

Error 645:

Incorrect APN or CID selected for network.

Internal

Modify your Dial-up Connection, see Create a GPRS, HSCSD or

authentication

CSD Connection on page 13 for more details. Make sure that the

error during

APN file contains the name of the access point your network operator

dial-up

is using. See the support section on www.sonyericsson.com site

 

for a full list of network operator APNs.

 

 

Error 650: The

Incorrect User ID and/or password. Re enter correctly.

Remote Access

 

server is not

 

responding

 

during dial-up

 

 

 

Error 678:

Either: Service is not supported by SIM (usually for CSD/HSCSD)

Computer you

or the computer is not answering.

are dialling is

 

not responding

1 Check SIM settings with your service provider if necessary,

during dial-up

 

 

2 Make sure that the server you are dialling is OK,

 

3 Make sure that Analogue mode has not been selected with

 

57.6kbps data rate (V110 or V120 mode must be selected

 

and supported by the network).

 

 

Error 720:

The service is not supported by the SIM, usually appears when you

No PPP control

are trying to connect to GPRS Internet. Contact service provider

protocols

to enable GPRS Internet access on SIM card.

configured

 

during dial-up

 

 

 

60Troubleshooting