In the Wireless Zero Config control panel
1.Disable 802.1x.
2.Enable WEP.
3.Uncheck the box that says "The key is provided for me automatically".
4.Provide a WEP key. The key can be anything at all and it can be at any WEP key index. The key is not used other than to prevent zero config from disassociating your network.
5.Click OK.
•If WZC is managing the network and the user is running CCX/LEAP, once CCX/LEAP is configured, if a user goes back to the "Wireless Networks" page and clicks OK, the CCX/LEAP configuration gets modified. Clicking OK causes WZC to repeat the initial system configuration, sets the infrastructure mode, and all of the dynamically assigned keys get cleared. The system eventually recovers. In the interim, all communication is lost.
Using a Connection
If your
Alternatively, if you have more than one network access profiles defined, you can specify the connection you want to use by clicking . The Connect to Wireless Network screen is displayed.
The list shows all the connections you have defined which are within range of an access point. Highlight the one you want to use, enter a Network Key (if appropriate) and then click on Connect.
Note:
If you are using Windows XP some of the processes explained in this manual interact with the operating system differently, see your Windows XP help for more details.
Once you have established a WLAN connection on an XP machine, Windows takes over, you will either have to use the standard Windows WLAN application to monitor your connection or specify that you want to use GC79 WLAN utility.
20 | Create a Wireless LAN Connection |