Note:

You do not need to select the Key format or the Key length before typing the network key. These settings automatically change to the appropriate setting as you type the network key value. However, the key value you enter must be the correct length.

14.Click OK. The network name and icon appear at the top of the Preferred networks list.

15.Click Refresh to activate the network connection (wait up to one minute for the network connection

to be made). Your computer is connected to the selected network when you see next to the network name.

WLAN Connections Using LEAP

To create a connection to a wireless LAN access point using LEAP:

1.Click on the Wireless Configuration Utility LEAP tab.

2.Check the Enable LEAP tick box.

3.Click Add. The LEAP Network Properties dialog opens, enter the LEAP network details and click OK.

4.Click Apply.

Under Windows XP // Windows Zero Config, the following points should be noted to get LEAP working:

Configure CCX/LEAP support using the control panel (when WZC is managing the network) execute the following steps:

In the Sony Ericsson Wireless Configuration Utility (Right-click the W icon in the status tray and select Open Utility):

1. Add the network to the LEAP configuration page with appropriate username and password.

Create a Wireless LAN Connection

19