Sony Ericsson GC79 Appendix C - Changing the GC79 Wireless LAN Adapter Properties

Appendix C - Changing the GC79 Wireless LAN Adapter Properties

1.Click the Start button.

2.Select Settings Control Panel.

3.Click System.

4.Select the Hardware tab.

5.Select Device Manager Network adapters 802.11b Network Adapter Advanced.

To change the value for any of the listed properties, click the property and then change the value in the Value box by either selecting a new value from the drop-down list or by typing in a new value, as appropriate.

Note:

It is strongly recommended that the values are only changed by network administrators or technicians with wireless LAN experience.

Item	Useful information
IBSS Channel	Selects the independent basic service set (IBSS) channel number on which to
Number	operate. The GC79 comes preset for use on channels 1-11. These values
	are legal in most countries. Some countries allow use on more channels. If
	you travel to one of these countries, you may change the value for IBSS
	Channel Number to 12 or 13.
Locale	Selects the operating characteristics that comply with the regulations that
	apply in a particular country. Before connecting to a wireless network, you
	should verify that the Locale value is correct. If you travel to different countries
	with your GC79, you should change the Locale value to suit. If the destination
	country is not listed, change the Locale value to Worldwide. Reset the Locale
	value after returning.
	Residents of both Canada and the United States should use the value USA.
	For details of an easier way of changing this value, see GC79 Wireless
	Control menu on page 34.
Radio Enable/	Enables or disables the GC79 wireless LAN radio. This may be necessary
Disable	necessary at times to turn off the radio to comply with restrictions prohibiting
	the emission of radio signals, such as during takeoff and landing onboard
	a commercial aircraft.
	For details of an easier way of changing this value, see GC79 Wireless
	Control menu on page 34.
Rate	Sets the transmission rate. The default value is Use best rate. This
	automatically adjusts the data rate to the optimal rate based on the
	capabilities of the other clients and access points.
Fragmentation	The threshold at which the IEEE 802.11 adapter breaks the packet into
Threshold	multiple frames.
Locally	This is used to override the MAC address of the GC79 wireless LAN
Administered	network adapter.
MAC Address
PLCP Header	This is used to set the header type used for CCK rates. The type can be
	long, or auto (short / long).
Power Output	Sets the percentage of the maximum available output power to be used.

Appendix C - Changing the GC79 Wireless LAN Adapter Properties 83