BNC connector (⋅ 2) loop-through, Automatic 75 ohms termination Phono jack (⋅ 2) loop-through
4-pinmini-DIN (⋅ 1) loop-through, Automatic 75 ohms termination Phono jack (⋅ 1) loop-through

Inputs (common to all models)

LINE A/B

BNC connector (⋅ 2), 1Vp-p ±6 dB,

VIDEO IN

 

sync negative

AUDIO IN

Phono jack (⋅ 2), –5 dBua), more than

 

47 kilo-ohms

LINE C

4-pin mini-DIN (⋅1)

Y/C IN

 

See the pin assignment on page 19.

AUDIO IN

Phono jack (⋅ 1), –5 dBua), more than

47kilo-ohms

RGB/COMPONENT

R/R-Y,G/Y,B/B-Y IN: BNC connector (⋅ 3) R, G, B channels: 0.7 Vp-p, ±6 dB

Sync on green: 0.3 Vp-p, negative

R-Y, B-Y channels: 0.7 Vp-p, ±6 dB

Y channel: 0.7 Vp-p, ±6 dB

 

(Standard color bar signal of 75%

 

chrominance)

AUDIO IN

Phono jack (⋅ 1), –5 dBua), more than

 

47 kilo-ohms

EXT SYNC IN

BNC connector (⋅ 1)

 

4 Vp-p, ±6 dB, sync negative

REMOTE

20-pin connector (⋅ 1)

 

See the pin assignment on page 19.

a)0 dBu = 0.775 Vr.m.s.

Outputs (common to all models)

LINE A/B

VIDEO OUT

AUDIO OUT

LINE C

Y/C OUT

AUDIO OUT

RGB/COMPONENT

R/R-Y,G/Y,B/B-Y OUT: BNC connector (⋅ 3)

 

loop-through

 

Automatic 75 ohms termination

AUDIO OUT

Phono jack (⋅ 1) loop-through

EXT SYNC OUT

BNC connector (⋅ 1)

 

Automatic 75 ohms termination

Speaker output

Output level: 0.8 W

General

For PVM-14M4U:

CRT

SMPTE-C phosphor

Power consumption

90 W (with SDI: 99 W)

Power requirements

120 V AC, 50/60Hz, 1.0 A

Dimensions (w/h/d)

Approx. 346 ⋅

340 ⋅ 431 mm

 

(135⁄8 ⋅ 131⁄2 ⋅

17 inches)

 

not incl. projecting parts and controls

Mass

Approx. 16.7kg (36 lb 13 oz)

Accessory supplied

AC power cord (1)

 

AC plug holder (1)

 

Tally label (1)

 

 

Cable with a 20-pin connector (1)

For PVM-14M4E/14M4A:

CRTEBU phosphor

Power consumption 90 W (with SDI: 99 W)

Power requirements 100 to 240 V AC, 50/60Hz, 1.2–0.5 A Peak inrush current

(1)Power ON, current probe method: 18 A (240 V)

(2)Hot switching inrush current, measured in accordance with European standard EN55103-1: 4 A (230 V)

Dimensions (w/h/d)

Approx. 346 ⋅

340 ⋅ 431 mm

 

(135⁄8 ⋅ 131⁄2 ⋅

17 inches)

 

not incl. projecting parts and controls

Mass

Approx. 16.7kg (36 lb 13 oz)

Accessory supplied

AC power cord (1)

 

AC plug holder (1)

 

Tally label (1)

 

 

Cable with a 20-pin connector (1)

For PVM-14M2U:

CRT

P-22 phosphor

 

Power consumption

90 W (with SDI: 99 W)

Power requirements

120 V AC, 50/60Hz, 1.0 A

Dimensions (w/h/d)

Approx. 346 ⋅

340 ⋅ 431 mm

 

(135⁄8 ⋅ 131⁄2 ⋅

17 inches)

 

not incl. projecting parts and controls

Mass

Approx. 16.7kg (36 lb 13 oz)

Accessory supplied

AC power cord (1)

 

AC plug holder (1)

 

Tally label (1)

 

 

Cable with a 20-pin connector (1)

17