Features
Picture
HR (High Resolution) Trinitron 1) picture tube for
Horizontal resolution is more than 800 TV lines at the center of the picture.
Trinitron1) picture tube
for
Comb filter
When NTSC video signals are received, a comb filter activates to make more accurate Y/C separation. This contributes to less of a decrease in resolution, cross color and cross luminance phenomena.
Beam current feedback circuit
The
Four color system available
The monitor can display NTSC, PAL, SECAM and NTSC4.432) signals. The appropriate color system is selected automatically.
Blue only mode
In the blue only mode, an apparent monochrome display is obtained with all three cathodes driven with a blue signal. This facilitates color saturation and phase adjustments and observation of VCR noise.
Input
Analog RGB/component input connectors Analog RGB or component (Y,
Y/C input connectors
The video signal, split into the chrominance signal (C) and the luminance signal (Y), can be input through this connector, eliminating the interference between the two signals, which tends to occur in a composite video signal, ensuring video quality.
External sync input
When the EXT SYNC selector is in the on position, the monitor can be operated on the sync signal supplied from an external sync generator.
Automatic termination
(connector with 
mark only)
The input connector is terminated at 75 ohms inside when no cable is connected to the
.......................................................................................................................................................................................................................................
1)“Trinitron” is a registered trademark of Sony Corporation.
2)The NTSC4.43 system refers to an NTSC color system in which the subcarrier frequency is modified to 4.43MHz. When an NTSC recorded video program is played back with a Trident (PAL/SECAM/NTSC4.43) VTR, the NTSC4.43 signal is output.
4