Sony Ericsson PVM-20M4A 8

Location and Function of Parts and Controls

Rear Panel

1		2			3			4
AC IN	LINE A		LINE B		LINE C
AC IN	VIDEO	IN	VIDEO	IN	VIDEO
IN	OUT	IN	OUT	IN	OUT		REMOTE
							REMOTE
IN	AUDIO	IN	AUDIO	IN	AUDIO
IN	OUT	IN	OUT	IN	OUT
IN	OUT	IN	OUT	IN	OUT	IN	OUT	IN	OUT
	R/R–Y		G/Y		B/B–Y	AUDIO
			RGB/COMPONENT					EXT SYNC

(The mark indicates automatic termination.)

1AC IN socket

Connect the supplied AC power cord to this socket and to a wall outlet.

2LINE A, LINE B connectors

Two groups (A and B) of line input connectors for the composite video and audio signals and their loop- through output connectors.

To monitor the input signal through these connectors, set the LINE/RGB selector to the LINE position (light off) and press the A/RGB or B/COMPONENT selector (light on).

VIDEO IN (BNC)

Connect to the video output of video equipment, such as a VCR or a color video camera.

For a loop-through connection, connect to the video output of another monitor.

VIDEO OUT (BNC)

Loop-through output of the VIDEO IN connector. Connect to the video input of a VCR or another monitor.

When the cable is connected to this connector, the 75-ohm termination of the input is automatically released, and the signal input to the VIDEO IN connector is output from this connector.

AUDIO IN (phono jack)

Connect to the audio output of a VCR or to a microphone via a suitable microphone amplifier. For a loop-through connection, connect to the audio output of another monitor.

AUDIO OUT (phono jack)

Loop-through output of the AUDIO IN connector. Connect to the audio input of a VCR or another monitor.

3LINE C connectors

Y/C IN (4-pin mini-DIN)

Connect to the Y/C separate output of a video camera, VCR or other video equipment.

For a loop-through connection, connect to the Y/C separate output of a VCR or another monitor.

Y/C OUT (4-pin mini-DIN)

Loop-through output of the Y/C IN connector. Connect to the Y/C separate input of a VCR or another monitor.

When the cable is connected to this connector, the 75- ohm termination of the input is automatically released, and the signal input to the Y/C IN connector is output from this connector.