Specifications

For PVM-14M2E/14M2A:

CRTP-22 phosphor

Power consumption 90 W (with SDI: 99 W)

Power requirements 100 to 240 V AC, 50/60Hz, 1.2–0.5 A Peak inrush current

(1)Power ON, current probe method: 18 A (240 V)

(2)Hot switching inrush current, measured in accordance with European standard EN55103-1: 4 A (230 V)

Dimensions (w/h/d)

Approx. 346 ⋅

340 ⋅ 431 mm

 

(135⁄8 ⋅ 131⁄2 ⋅

17 inches)

 

not incl. projecting parts and controls

Mass

Approx. 16.7kg (36 lb 13 oz)

Accessory supplied

AC power cord (1)

 

AC plug holder (1)

Tally label (1)

Cable with a 20-pin connector (1)

For PVM-20M4U:

CRT

SMPTE-C phosphor

Power consumption

125 W (with SDI: 135 W)

Power requirements

120 V AC, 50/60Hz, 1.3 A

Dimensions (w/h/d)

Approx. 450 ⋅

458 ⋅ 503 mm

 

(173⁄4 ⋅ 181⁄8 ⋅

197⁄8 inches)

 

not incl. projecting parts and controls

Mass

Approx. 30.0 kg (66 lb 2 oz)

Accessory supplied

AC power cord (1)

 

AC plug holder (1)

 

Tally label (1)

 

 

Cable with a 20-pin connector (1)

For PVM-20M4E/20M4A:

CRTEBU phosphor

Power consumption 130 W (with SDI: 140 W)

Power requirements 100 to 240 V AC, 50/60Hz, 1.6–0.6 A Peak inrush current

(1)Power ON, current probe method: 18 A (240 V)

(2)Hot switching inrush current, measured in accordance with European standard EN55103-1: 7 A (230 V)

Dimensions (w/h/d)

Approx. 450 ⋅

458 ⋅ 503 mm

 

(173⁄4 ⋅ 181⁄8 ⋅

197⁄8 inches)

 

not incl. projecting parts and controls

Mass

Approx. 30.0 kg (66 lb 2 oz)

Accessory supplied

AC power cord (1)

 

AC plug holder (1)

 

Tally label (1)

 

 

Cable with a 20-pin connector (1)

For PVM-20M2U:

CRT

P-22 phosphor

 

Power consumption

115

W (with SDI: 125 W)

Power requirements

120

V AC, 50/60Hz, 1.2 A

Dimensions (w/h/d)

Approx. 450 ⋅

458 ⋅ 503 mm

 

(173⁄4 ⋅ 181⁄8 ⋅

197⁄8 inches)

 

not incl. projecting parts and controls

Mass

Approx. 30.0 kg (66 lb 2 oz)

Accessory supplied

AC power cord (1)

 

AC plug holder (1)

Tally label (1)

Cable with a 20-pin connector (1)

For PVM-20M2E:

CRTP-22 phosphor

Power consumption 120 W (with SDI: 130 W)

Power requirements 100 to 240 V AC, 50/60Hz, 1.5–0.6 A Peak inrush current

(1)Power ON, current probe method: 18 A (240 V)

(2)Hot switching inrush current, measured in accordance with European standard EN55103-1: 7 A (230 V)

Dimensions (w/h/d)

Approx. 450 ⋅

458 ⋅ 503 mm

 

(173⁄4 ⋅ 181⁄8 ⋅

197⁄8 inches)

 

not incl. projecting parts and controls

Mass

Approx. 30.0 kg (66 lb 2 oz)

Accessory supplied

AC power cord (1)

 

AC plug holder (1)

 

Tally label (1)

 

 

Cable with a 20-pin connector (1)

Common to all models

Operating temperature

 

0 to +35°C (32 to 95°F)

Transport and Storage temperature

 

–10 to +40°C (14 to104°F)

Pressure

700 to 1,060 hPa

Humidity

0 to 90% (no condensation)

Design and specifications are subject to change without notice.

18