•You used another intonation – use the same intonation as in the recorded voice command.

To activate voice dialing and record names

Record names using the phone, portable handsfree, or Bluetooth™ handsfree.

1} Settings } the General tab } Voice Control } Voice Dialing } Activate

}Yes } New Voice Cmd. and select a contact.

2If the contact has more than one

number, use and to view the numbers. Select the number to add the voice command to. Record a voice command such as “John mobile”.

3Instructions appear. Wait for the tone and say the command to record. The voice command is played back to you, if the recording quality is acceptable.

4If the recording sounds OK to you

}Yes. If not } No and repeat step 3. To record another voice command for a contact } New Voice Cmd. } Add again and repeat steps 2-4 above.

Caller name

Hear your recorded contact name when you receive a call from that contact.

To turn the caller name on or off

}Settings } the General tab

}Voice Control } Play Caller Name.

Voice dialing

Start voice dialing from standby using the phone, a portable handsfree, a Bluetooth headset or by saying your magic word.

To voice dial from the phone

1From standby, press and hold one of the volume keys.

2Wait for the tone and say a recorded name, for example “John mobile”. The name is played back to you and the call is connected.

To voice dial with a handsfree

1From standby, press and hold the handsfree button, or press the Bluetooth™ headset button.

2Wait for the tone and say a recorded name, for example “John mobile”. The name is played back to you and the call is connected.

30Calling

This is the Internet version of the user's guide. © Print only for private use.