Southbend 4365A, 4601DD-2RR owner manual GAS Requirements

Models: 4365A 4601DD-2RR

1 48
Download 48 pages 12.37 Kb
Page 5
Image 5

ULTIMATE RESTAURANT RANGES

SPECIFICATIONS

GAS REQUIREMENTS

The total BTU gas requirement for the range varies depending on the ordered options. The gas requirement and type of gas the range is configured for (natural gas or propane) is stated on the serial plate.

A 3/4" female NPT gas connection is located on the rear of the range (see Figure 2).

The serial plate is located inside the oven kick panel (see Figure 1). The serial plate indicates the type of gas the range is equipped to burn, and the total gas supply requirement (in BTUs). All Southbend equipment is adjusted at the factory.

These models are design-certified for operation on natural or propane gases. A kit for conversion to a different type of gas is available from Southbend.

For natural gas, the regulator is set to 4" W.C. (0.99 kPa). For propane gas, it is set to 10" W.C. (2.48 kPa). If applicable, the vent line from the gas appliance pressure regulator shall be installed to the outdoors in accordance with local codes, or in the absence of local codes, with the applicable national codes.

This appliance should be connected ONLY to the type of gas for which it is equipped.

An adequate gas supply is imperative. Undersized or low pressure lines will restrict the volume of gas required for satisfactory performance. A 1/8" pressure tap is located on the manifold to measure the manifold pressure.

An adequate gas supply line to the range should be no smaller than the inside diameter of the pipe from the range to which it is connected.

Purge the supply line to clean out dust, dirt, or other foreign matter before connecting the line to the range.

All pipe joints and connections must be tested thoroughly for gas leaks. Use only soapy water for testing on all gases. NEVER use an open flame to check for gas leaks. All connections must be checked for leaks after the range has been put into operation. Test pressure should not exceed 14" W.C. (3.47 kPa).

OWNERS MANUAL 1190820 REV 3 (11/10)

PAGE 5 OF 48

Page 5
Image 5
Southbend 4365A, 4601DD-2RR owner manual GAS Requirements

4365A, 4601DD-2RR specifications

The Southbend 4601DD-2RR and 4365A are advanced commercial cooking appliances designed to deliver exceptional performance, efficiency, and reliability in professional kitchens. Recognized for their robust engineering and user-friendly features, these models are ideal for a variety of cooking environments, from bustling restaurants to catering services.

The Southbend 4601DD-2RR is a double-stacked convection oven that offers a generous cooking capacity, allowing chefs to prepare large volumes of food simultaneously. Its innovative design features two independent oven compartments, each equipped with powerful fan-assisted convection heating that ensures even cooking and consistent results. The unit operates with a temperature range of 200°F to 500°F, providing versatility for various cooking techniques, including roasting, baking, and toasting. The built-in digital controls allow for precise temperature management and easy programming, further enhancing the user experience.

Meanwhile, the Southbend 4365A is a high-performance countertop griddle that boasts an impressive cooking surface area. Its heavy-duty, stainless steel construction guarantees longevity and easy maintenance. The griddle features a smooth cooking surface that provides even heat distribution, making it perfect for breakfast items like pancakes and eggs or lunch favorites like burgers and sandwiches. With a temperature control knob for adjustable heat levels, chefs can achieve perfectly cooked items tailored to their specifications.

Both models incorporate advanced safety features, such as automatic shut-off systems and heat-resistant handles, ensuring a secure working environment in the busy kitchen. Energy efficiency is another highlight, with both models designed to minimize energy consumption while delivering maximum output. This focus on sustainability not only reduces operational costs but also lessens the environmental impact.

Additionally, the Southbend 4601DD-2RR and 4365A come equipped with thorough insulation, which helps maintain optimal cooking temperatures while preventing surface heat buildup. This is critical for ensuring safety and efficiency in food preparation.

In summary, the Southbend 4601DD-2RR and 4365A are exemplary showcases of modern culinary technology, combining robust construction with user-centric design, making them invaluable assets for any kitchen aiming for excellence. Their reliability, performance capabilities, and safety features position them as leaders in the commercial cooking equipment market.