INFRARED CHEESE MELTER | INTRODUCTION |
INTRODUCTION
Congratulations! You have purchased one of the finest pieces of
You will find that your new equipment, like all Southbend equipment, has been designed and manufactured to meet the toughest standards in the industry. Each piece of Southbend equipment is carefully engineered and designs are verified through laboratory tests and field installations. With proper care and field maintenance, you will experience years of reliable,
RETAIN THIS MANUAL FOR FUTURE REFERENCE.
This manual is divided into six sections: |
|
Introduction | 3 |
Specifications | 4 |
Operation | 8 |
Cleaning & Maintenance | 11 |
Installation | 13 |
Service | 19 |
The serial plate is located under the cheese melter drip pan at the front, toward the left (see Figure 1).
Read these instructions carefully before attempting installation. Installation and initial startup should be performed by a qualified installer. Unless the installation instructions for this product are followed by a qualified service technician (a person experienced in and knowledgeable with the installation of commercial gas and/or electric cooking equipment) then the terms and conditions on the Manufacturer’s Limited Warranty will be rendered void and no warranty of any kind shall apply.
In the event you have questions concerning the installation, use, care, or service of the product, contact:
Southbend Technical Service
1100 Old Honeycutt Road
Fuquay Varina, North Carolina 27526 USA
www.southbendnc.com
Figure 1
Location of Serial Plate
Serial Plate (located under drip pan)
OWNER’S MANUAL 1186531 REV 2 (09/11) | PAGE 3 OF 24 |
