EVS Toolroom Lathes | O P E R A T I O N | For Machines Mfg. Since 7/09 |
Description of Controls & Components
Refer to the following figures and descriptions to become familiar with the basic controls of this machine.
Main Power Switch
The main power switch is shown in Figure 33. It turns master power ON/OFF to the lathe.
Main
Power 
Switch
Figure 33. Main power switch.
Headstock Controls
AB 
F
C
E
D DD
D 
Figure 34. Headstock controls.
A.Change Gear Chart: Displays the positions of the various gears for different threading or turning options.
B.Spindle Speed Range Lever: Shifts the headstock into low or high range for spindle speeds between
C.Thread and Feed Chart: Shows the configurations of the gearbox levers to achieve a particular feed rate.
D.Gearbox Levers: Move the gearbox gears into particular ratios, which then turn the leadscrew and feed rod for threading and power feed operations.
E.Feed Direction Lever: Shifts the direction that the gearbox is turning, which changes the direction of the leadscrew and feed rod.
F.Gearbox Range Lever: Shifts the gearbox between high, neutral, or low range and has no effect on spindle RPM.
Carriage Controls
|
| H |
| G |
|
|
| I |
S | R | J |
| ||
T |
| K |
|
| L |
Q |
|
|
P |
| M |
O | N | |
|
|
Figure 35. Carriage controls.
G.
