Manuals / Southbend / Power Tools / Lathe

Southbend SB1038, SB1014, SB1015, SB1037, SB1012, SB1013 owner manual Re-install the access covers

Models: SB1037 SB1038 SB1012 SB1015 SB1013 SB1014

1 80
Download 80 pages 61.69 Kb
Page 74
Image 74

EVS Toolroom Lathes

S E R V I C E

For Machines Mfg. Since 7/09

7.Use the magnet to remove the shear pin head, then rotate the lathe spindle to line up the inner and outer bores, as shown in Figure 146. Next, use the magnet to remove the other half of the broken shear pin when it becomes visible.

Inner Bore

Outer Bore

Figure 146. Aligned shear pin bores.

8.Insert a blow gun tip into the shear pin hole, blow out the hole with compressed air, and put a drop of oil in the hole.

9.Insert the new shear pin into the bore, as shown in Figure 147.

New Pin

Figure 147. New shear pin installed in bore.

—If the pin does not freely slide into the bore, DO NOT hammer on the pin or you may permanently damage the shear mechanism and bore, making it nearly impossible to remove and install a new shear pin later.

Instead, take the time to carefully line up the two bores. You may file a slight chamfer on the end of the pin to make it easier to insert.

10.With the pin completely seated in the bore and the head flush with the leadscrew shoulder, slide the shroud washer against the shoulder, then rotate the washer 180° until it covers the head of the shear pin, as shown in Figure 148.

Rotate

Washer

Slot 180°

Figure 148. Shroud washer positioning.

11.Using retaining ring pliers, return the retaining ring to its groove, and position the retaining ring ears over the shear pin head, as shown in Figure 149, to prevent the shear pin from falling out—if the shroud washer rotates into alignment with the pin access groove lines.

Figure 149. Retaining ring positioned with ears in

front of pin access groove, so pin cannot fall out.

12.Re-install the access covers.

-72-

Page 73 Page 75
Page 74
Image 74
Southbend SB1038, SB1014, SB1015, SB1037, SB1012, SB1013 owner manual Re-install the access covers
Page 73 Page 75

SB1037, SB1038, SB1012, SB1015, SB1013 specifications

The Southbend SB1012 is a versatile and efficient commercial range designed specifically for the rigorous demands of professional kitchens. This powerful cooking appliance features a robust construction and advanced technologies that cater to chefs who require precision and reliability in their culinary endeavors.

One of the standout features of the SB1012 is its powerful burners, which come equipped with heavy-duty cast-iron grates. The range typically includes four open burners that deliver exceptional heat output. This allows chefs to achieve quick boiling, searing, and simmering, thereby ensuring perfect cooking results every time. The burners are designed to provide consistent heat distribution, reducing the chance of hot spots and uneven cooking.

The Southbend SB1012 also incorporates a 12-inch griddle, adding another layer of versatility to its functionality. The griddle is constructed from high-quality materials that provide even heat and withstand high temperatures, making it suitable for cooking everything from pancakes to stir-fried dishes. The grease trough and easy-to-clean design contribute to the overall efficiency of the kitchen.

In addition to its cooking surfaces, the SB1012 features a spacious oven compartment, designed to accommodate larger pans and dishes. With a temperature range that typically goes up to 500 degrees Fahrenheit, the oven is ideal for baking, roasting, and other cooking techniques that require precise temperature control. The inclusion of a built-in temperature gauge helps chefs monitor cooking conditions at a glance.

Durability is a hallmark of the Southbend SB1012. The range is constructed from heavy-duty stainless steel, which not only enhances its aesthetic appeal but also ensures resistance to wear and tear in a busy kitchen environment. The removable ovens and easy-access components facilitate straightforward cleaning and maintenance, ensuring the equipment remains in peak condition even after extensive use.

To further improve user experience, the Southbend SB1012 is designed with safety features in mind. The range often includes pilot lights for easy ignition, and the heavy-duty construction minimizes the risk of accidental damage.

In summary, the Southbend SB1012 combines powerful cooking performance with durable construction and ease of use, making it a preferred choice for professional kitchens looking to optimize their cooking capabilities. Its advanced features, versatility, and reliability are tailored to meet the high standards of culinary professionals.