For Machines Mfg. Since 7/09

O P E R A T I O N

EVS Toolroom Lathes

Changing Jaws

 

Item Needed

Qty

Chuck Key

1

White Lithium Grease

As Needed

To change the jaw:

1.DISCONNECT LATHE FROM POWER!

2.Place a piece of wood over the ways to protect them from potential damage.

3.Insert the chuck key and turn it counterclockwise to back the jaws out and remove them.

4.Clean the jaw mating surfaces and apply a thin film of white lithium grease to the mating surfaces.

5.Set the previously mounted jaws aside in a safe place free of moisture and abrasives.

6.Rotate the chuck key clockwise until you see the tip of the scroll gear lead thread just begin to enter jaw guide #1 (see Figure 51).

Lead Thread

Figure 51. Inserting jaw guide #1.

7.Insert jaw #1 into jaw guide #1 and hold the jaw against the scroll gear lead thread.

8.Rotate the chuck key clockwise one turn to engage the tip of the scroll gear lead thread into the jaw. Pull on the jaw—now it should be locked into the jaw guide.

9.Repeat the Steps 6–8on the remaining jaws.

If installed correctly, the jaws converge together at the center of the chuck.

If the jaws do not come together, remove them, then repeat this procedure until they do.

Mounting Workpiece

 

Items Needed

Qty

Chuck Key

1

Chuck Cradle or Plywood 34" (to protect bed)

1

To mount a workpiece in the 3-jaw chuck:

1.DISCONNECT LATHE FROM POWER!

2.If the workpiece is large and heavy, place a chuck cradle or plywood on the bedway below the chuck to protect it.

3.Use the chuck key to move the jaws and mount the workpiece into the chuck (refer to Figure 52 for typical mounting methods).

Mounting on an Outside Diameter

Mounting in an Inside Diameter

Figure 52. Typical of 3-jaw chuck mounting methods.

4.Rotate the chuck by hand to make sure the workpiece makes even contact with all three jaws and spins evenly without any visible wobble.

If the workpiece is not evenly held or is off-center, repeat Steps 3–4.

5.After verifying that the workpiece is properly centered, fully tighten the jaws to make sure the workpiece is held securely, so it will not come loose during operation.

-31-

Page 33
Image 33
Southbend SB1037, SB1014, SB1015, SB1038, SB1012, SB1013 Changing Jaws, Mounting Workpiece, Item Needed Qty, To change the jaw

SB1037, SB1038, SB1012, SB1015, SB1013 specifications

The Southbend SB1012 is a versatile and efficient commercial range designed specifically for the rigorous demands of professional kitchens. This powerful cooking appliance features a robust construction and advanced technologies that cater to chefs who require precision and reliability in their culinary endeavors.

One of the standout features of the SB1012 is its powerful burners, which come equipped with heavy-duty cast-iron grates. The range typically includes four open burners that deliver exceptional heat output. This allows chefs to achieve quick boiling, searing, and simmering, thereby ensuring perfect cooking results every time. The burners are designed to provide consistent heat distribution, reducing the chance of hot spots and uneven cooking.

The Southbend SB1012 also incorporates a 12-inch griddle, adding another layer of versatility to its functionality. The griddle is constructed from high-quality materials that provide even heat and withstand high temperatures, making it suitable for cooking everything from pancakes to stir-fried dishes. The grease trough and easy-to-clean design contribute to the overall efficiency of the kitchen.

In addition to its cooking surfaces, the SB1012 features a spacious oven compartment, designed to accommodate larger pans and dishes. With a temperature range that typically goes up to 500 degrees Fahrenheit, the oven is ideal for baking, roasting, and other cooking techniques that require precise temperature control. The inclusion of a built-in temperature gauge helps chefs monitor cooking conditions at a glance.

Durability is a hallmark of the Southbend SB1012. The range is constructed from heavy-duty stainless steel, which not only enhances its aesthetic appeal but also ensures resistance to wear and tear in a busy kitchen environment. The removable ovens and easy-access components facilitate straightforward cleaning and maintenance, ensuring the equipment remains in peak condition even after extensive use.

To further improve user experience, the Southbend SB1012 is designed with safety features in mind. The range often includes pilot lights for easy ignition, and the heavy-duty construction minimizes the risk of accidental damage.

In summary, the Southbend SB1012 combines powerful cooking performance with durable construction and ease of use, making it a preferred choice for professional kitchens looking to optimize their cooking capabilities. Its advanced features, versatility, and reliability are tailored to meet the high standards of culinary professionals.