Southbend SB1049 owner manual Follow Rest, Carriage & Slide Locks

	O P E R A T I O N
For Machines Mfg. Since 5/11		13" Heavy 13® Gearhead Lathe

Follow Rest

The follow rest mounts to the saddle with two cap screws (see Figure 55). It is used on long, slender parts to prevent workpiece deflection from the pressure of the cutting tool during operation. Adjust the follow rest fingers in the same manner as the those on the steady rest.

Note: To reduce the effects of friction, lubricate the brass finger tips with generous lubricant during operation.

Cap

Screws

Figure 55% Follow rest attachment.

Carriage & Slide Locks

The carriage, cross slide, and compound rest have locks that can be tightened to provide additional rigidity during operation, especially during heavy cuts or close tolerance work.

See Figures 56–57to identify the locations of the locks for each device.

Cross Slide	Carriage
Lock	Lock

Figure 56. Location of carriage and cross slide locks.

Compound Rest

Lock

Figure 57. Location of compound rest lock.

-45-