Southbend SB1269 Unpacking, Things Youll Need, Inventory Figure Qty, For Assembly

For Product Mfg. Since 1/10 P R E P A R A T I O N Model SB1269

Unpacking

This item was carefully packaged to prevent damage during transport. If you discover any damage, please immediately call Customer Service at (360) 734-1540 for advice. You may need to file a freight claim, so save the containers and all packing materials for possible inspection by the carrier or its agent.

Inventory

When you are completely satisfied with the condition of your shipment, you should inventory the contents.

Inventory (Figure 3) Qty

A.Cap Screws M10-1.5 x 40mm

	(Taper Attachment Mounting)	4
B.	Taper Attachment Assembly	1
C. Tapered Pins 8.7 x 7.7 x 47mm		2
D.	Copper Anti-Score Plug	1
E.	Deadman Clamp Assembly	1
F.	Deadman Arm and Clevis	1

Things You'll Need

This attachment is intended to be a permanent installation. Installation will take approximately

1.2 hours and require the following items:

For Assembly

•Cotton Rags

•Mineral Spirits

•Safety Glasses

•Oil Can with any Basic Machine Oil

•Assistant

•Open End Wrench (17mm)

•Hex Wrenches (3, 4, 5, 6, and 8mm)

•Tapered Drill Bit (8mm)

•Safety Glasses

•Oil Can with Pressure Tip

•Dila Indicator with Magnetic Base

•Phillips Screwdriver, #2

•Hammer

•Drill Bit, 19⁄64"

•Spiral Pin Reamer, Industrial Size: 6

—Small End Diameter: 0.2773"

—Large End Diameter: 0.3540"

A

B

C

ED

F

Figure 3. Model SB1269 inventory.

-3-