INSTALLATION (CONT.)
Handsets ID Registration
1.After base unit installation has been finished, place the handsets on the base and charger and make sure each handset is charged for 10~14 hours.
NOTE:
The handset which has been charged at the external charger must be placed on the main base unit for about 5 seconds to make proper ID registeration.
Both of Handset 1 and Handset 2 must be placed into base for about 5 seconds.
Handset 1 | Handset 2 |
Handset 1 (“H1”) ID registered
Handset 2 ( “H2”) ID registered
TRAN | TRAN |
IMPORTANT: If there is no“ dial tone or LCD displays ‘ No Link ’ then,
1.Press and hold Page 1 button on the base and CH button on one of the handsets simultaneously for 10 seconds, then the handset LCD will display H1.
2.Press and hold Page 2 button on the base and CH button on the other handset simultaneously for 10 seconds, then the handset LCD will display H2.
This may need repeating in case of a power failure to
16
