Southwestern Bell GH3210 To Program Frequently Called Numbers, To Change a Stored Number, Redial

TELEPHONE OPERATION (CONT.)

To Program Frequently Called Numbers

1.Pick up the handset. DO NOT PRESS TALK button.

2.Press the MEM button; the LCD display will show “PHONEBOOK”.

3.Dial phone number (up to 15 digits). Each TONE(*) entered uses one of the available digits. If you pause more than 10 seconds in programming, the unit will exit the memory programming. If you accidentally press a16- th digit, 3 error tones will sound, press DEL button to erase digits.

4.Press the MEM button again and key-in the name (up to 15 characters).Use DEL button to erase character.

NOTE:

To input consecutive characters within the same button, press and hold the button for 3 seconds. The cursor will move to next input position.

5.Press MEM button again. The LCD dis- play will show “ENTER LOCATION?”.

6.Enter memory location (0~9).

7.The LCD display will show “SAVE OK” to confirm the number has been success- fully stored in memory.

To Change a Stored Number

1.Press MEM button and or button to select memory location.

2.Press DEL button to erase memory. The LCD display will show “DELETE ITEM ?”.

3.Press DEL button to confirm.

4.Reprogram the new number.

Redial

Your GH3210 remembers the last num- ber dialed.

1.Press the TALK button on the handset. When you hear a dial tone, press the REDIAL button.

or

2.Press the REDIAL button, the last num- ber will be shown on the LCD display. Press the TALK button.

PAUSE

Pause

To Retrieve Stored Numbers

1.Press MEM button, then press or buttons to select desired memory location.

2.Press TALK button. The number you pro grammed will be dialed automatically.

23

You can insert a 3-second PAUSE into the dialing of long distance numbers. Press the REDIAL/PAUSE button on the handset during dialing.

Receiving a Call

After the first ring, the caller’s name and