SOYO G668 Ethernet IP Phone User Guide
dhcp: Select this item to enable DHCP mode. With this system, your LAN or router automatically assigns all the required network parameters to any device connected to it when the device log on. So, if your LAN or router is configured to use DHCP addressing, the IP phone’s LAN parameters will automatically be configured as soon as it is connected to the LAN or router and powered up.
pppoe： Select this item to enable PPPoE protocol. Some DSL providers require PPPoE setup. For more information, please contact your DSL provider.
modem：This function is not supported.
pppid: With pppoe or modem selected in iptype drop down list, please enter the user name here.
ppppin: With pppoe or modem selected in iptype drop down list, please enter the password here.
local ip: With static ip selected in iptype drop down list, please enter IP address of IP phone here.
subnet mask: With static ip selected in iptype drop down list, please enter subnet mask of IP phone here.
router ip: With static ip selected in iptype drop down list, please enter router IP address of IP phone here.
dns: With static ip selected in iptype drop down list, please enter IP address of DNS server here.
dns 2: With static ip selected in iptype drop down list, please enter IP address of backup DNS server here.
mac: MAC address is the physical address supplied by the Ethernet NIC. Centrality PA168S phone is shipped from the factory with a unique algorism MAC address printed on the back of the base.
Protocol Settings
Note: Please check with your VoIP service provider for the protocol settings. Changing the settings without proper guidance may result the IP phone not functioning.
nat traversal: NAT traversal method the IP phone uses.
15
