SOYO G668 manual Installation within a Home or Office Network

SOYO G668 Ethernet IP Phone User Guide

Installation within a Home or Office Network

Broadband

Modem

WAN LAN

Router

		Computer 1
		Computer 2
		Computer
WAN	LAN	(Optional)

IP Phone

1.Connect one end of the Ethernet RJ-45 cable to an open Ethernet LAN port on your router, and connect the other end of the cable to the WAN port at the rear of the G668 IP phone.

2.Using another RJ-45 cable, you can connect one end of the Ethernet RJ-45 cable to your computer, and connect the other end to the LAN port at the rear of the G668 IP phone. (This is an optional step. IP phone can work without the computer)

3.Connect the power adapter to the AC outlet and the power jack at the rear of G668 IP phone.

4.Once the IP Phone is powered up, the booting sequence will begin. You will see the following information displayed on the LCD screen:

Booting …

È

DHCP

Connecting …

È

Ready For Calls

SOYO_Group

9