SOYO SY-6BA+ IV user manual Jumper Setting, GND Ø Pay special care to the directionality

Hardware Installation SY-6BA+ IV

This motherboard requires a power supply, that meets the ATX 2.03 specifications. Make sure the power supply can support at least 720mA on the 5V Standby lead.

Please install the ATX power according to the following pin assignment:

ATX Power

12V

5VSB PW-OK GND 5 V GND 5 V GND 3.3V

3.3V

5V

5V

-5V

GND Ø Pay special care to the directionality.

GND

GND

PS-ON

GND

-12V 3.3V

2-3.4 Jumper Setting

Step 1. 5V Stand-by indicator LED (LED 1)

This LED is lit whenever the 5V Standby voltage coming from the ATX power supply is available. If you have connected your ATX power supply to the motherboard, LED 1 should be lit.

Step 2. External Suspend Button (JP1)

Some cases come with a suspend button, insert the plug into JP1. In addition to this button, the system can also enter the suspend mode through your OS.

Note: Suspend mode only functions if your Power Management mode is APM. Make sure that the BIOS setting for Power Management is APM. Windows 98 can be installed with ACPI Power Management (default is APM), in this case suspend mode will not function either.

43