BIOS Setup UtilitySY-6BA+ IV
3-8.5 Onboard Parallel Ports
Onboard Parallel |
| Setting | Description | Note |
Ports |
|
|
|
|
|
|
|
|
|
Onboard Parallel |
|
|
|
|
| 378H/IRQ7 | Choose the printer I/O | Default | |
Port |
| 3BCH/IRQ7 | address. |
|
|
| 278H/IRQ5 |
|
|
|
|
|
|
|
Parallel Port Mode
ECP/EPP
SPP
ECP
EPP/SPP
The mode depends on your Default external device that 
connects to this port.
If [Parallel Port Mode] is set to [ECP] mode
ECP Mode use
DMA
3 | Choose DMA3 | Default |
1 | Choose DMA1 |
|
|
|
|
If [Parallel Port Mode] is set to [EPP] mode
EPP Mode Select
PWRON After PWR-Fail
| EPP 1.9 | Select EPP port type 1.9 |
|
| EPP 1.7 | Select EPP port type 1.7 | Default |
|
|
|
|
| On | The system will switch on |
|
|
| when power comes back |
|
|
| after a power failure. |
|
| Off | The system will remain off | Default |
|
| when power comes back |
|
|
| after a power failure. |
|
| The system will return to |
| |
|
| the state it was in before the |
|
|
| power failure when power |
|
|
| returns. (i.e: If the system |
|
|
| was on, it will switch on |
|
again, if it was off, it will remain off)
83
