SOYO SY-6IZA-NA quick start Reset

Hardware Installation

SY-6IZA/6IZA-NAQuick Start Guide

Step 2. Make Connections to the Motherboard

This section tells how to connect internal peripherals and power supply to the Motherboard.

Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan, Front Panel Devices (Turbo LED, Internal Speaker, Reset Button, IDE LED, and KeyLock Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices.

For more details on how to connect internal and external peripherals to your new SY- 6IZA/6IZA-NA Motherboard, please refer to SY-6IZA/6IZA-NA Motherboard User's Guide and Technical Reference online manual on CD-ROM.

Connectors and Plug-ins

PCI Audio Card Header: SB-Link ™ (PC-PCI)	Wake-On-LAN Header: JP44
Connect the SB-Link ™ (PC-PCI) cable from your PCI audio	Pin1	Pin2	Pin3
card to this header.	5VSB	GND	MP-Wakeup

	CPU Cooling Fan: CPUFAN					Chassis Fan: CHAFAN
Pin1		Pin2		Pin3		Pin1		Pin2		Pin3
GND		12V	SENSOR			GND		12V	SENSOR
	CD Line-in:J4,J5 (for SY-6IZA only)					Pin1		Pin2	Pin3	Pin4
Connect the CD Line-in cord from the CR-ROM device to J4							L	G	G	R
the matching connector J4 or J5						J5	L	G	R	G
Power LED Key Lock Speaker						Power LED			Keylock
+	_	+	_		Pin1	Pin2	Pin3	Pin1		Pin2
					5V	NC	GND	Control Pin		GND
		+	_ + _				Speaker
					Pin1	Pin2		Pin3	Pin4
Reset	PWRBT	Turbo LED HDD LED			5V	NC		NC	Speaker out
HDD LED			Turbo LED			PWRBT			RESET
Pin1	Pin2		Pin1		Pin2	Pin1	Pin2		Pin1	Pin2
LED Anode LED Cathode			LED Cathode		GND Power On/Off		GND Power Good			GND
IrDA (Infrared Device Header): IR1						ATX Power On/Off: PWRBT
Pin1	Pin2	Pin3	Pin4	Pin5	Connect your power switch to this header (momentary
					switch type).
VCC	None	IRRX	GND	IRTX	To turn off the system, please press this switch and
					hold down for longer than 4 seconds.

ATX Power Supply: ATX PW

Attach the ATX Power cable to this connector.

When using the Power-On by PS/2 Keyboard function, please make sure the ATX power supply is able to be loaded at least 720mA on the 5V Standby lead (5VSB) in order to meet the standard ATX specifications.

Note: Use only ONE type of power supply if an AT power supply is used, do not attach an ATX power supply.

8