Hardware Installation |
|
The Motherboard requires a power supply with at least 350 Watts and a "power good" signal. Make sure the ATX power supply can take at 1.5 A max current * load on the 5V Standby lead (5VSB) to meet the standard ATX specification.
*Note: If you use the
Please install the ATX power according to the following pin assignment:
ATX Power
12V
5VSB
5V
5V
GND
GND
GND
GND
Pay special care to the directionality.
Pin1 Pin3
COM COM
+12VDC
+12VDC
+12V Power Connector
30