SOYO SY-P4I845PE user manual Ide Led, ATX Power On/Off Switch

Hardware Installation SY-P4I845PE

5. IDE LED

Attach the 2-pin IDE device LED cable to the corresponding IDE LED header on the Motherboard. This will cause the LED to lighten when an IDE1 or IDE2 (HDD, CD-ROM) device is active.

HDD LED Pin Assignment

Pin9+ Pin10_

LED Anode LED Cathode

6. ATX Power On/Off Switch

Attach the 2-pin momentary type switch to the PWRBT header for turning On or Off your ATX power supply. Note that 5VSB will always have power.

PWRBT Pin Assignment

Pin4 Pin5

Power On/Off GND

20