HighPoint hpt371 Driver Installation

SY-P4I845PE

NT4.0.

Install driver during Windows 2000 installation

1.Go to “D:\raid\hpt371\121\” directory, (assuming that your CD-ROM is drive d) copy all the files and directories to a floppy disk.

2.If Windows 2000 is installed from the floppy drive, please let the installing program run automatically. If Windows

2000 is installed from the CD-ROM drive, please press the F6 key when the message Press F6 if you need to install third party SCSI or RAID driver appears.

3.Press the S key to specify additional devices when the Windows 2000 Setup window appears.

4.Insert the floppy disk with the driver, then press Enter to continue.

5.The system will ask whether to install the driver under WinNT or under Windows 2000, please select to install the driver under Windows 2000.

6.In the next screen (Device Type), please select Other and press Enter to continue.

7.The next screen will list the devices to be installed, in which HPT371 UDMA/ATA133 Controller item should be included (If users want to install other devices, please do so at this time. If all devices have been successfully installed, please go to next.)

Install driver during Windows XP installation

1.Go to “D:\raid\\hpt371\121\” directory, (assuming that your CD-ROM is drive d) copy all the files and directories to a floppy disk.

2.Booting from CD-ROM, when the Windows XP Setup’s blue screen appears and prompts the user to press the F6 key to install third party SCSI or RAID driver, please press

88

Page 92
Image 92
SOYO SY-P4I845PE user manual Install driver during Windows 2000 installation