Spalding 21196804 manual Before YOU Start

BEFORE YOU START!

To ensure optimal playability of backboard system, a close tolerance fit between the elevator components and hardware is required. Test-fit large bolts into large holes of elevator tubes, backboard brackets, and triangle plates. Carefully rock them in a circular motion to ream out any excess paint from holes if necessary.

Not all items pictured are included with every model.

35

HEIGHT ADJUSTMENT

TO ADJUST BACKBOARD:		1
1.	While holding handle, remove pin.	3
2.	Move elevator up or down to
	desired height.	2

3. Replace pin full length to lock system at desired height.

2

201251 2/99

P/N 21196804 10/04 2