Spalding M661154 manual Pole Sections, Should have a, Overlap

1.Correctly identify each pole section.

1

I.D. Label I.D. Label

2

WARNING

LABEL

3

2.Bounce middle pole (2) into top pole section (1) using a wood scrap as shown until top pole no longer moves toward pole identification mark on middle pole.

CAUTION!

THE IDENTIFICATION STICKER IS LOCATED 5" FROM THE END OF THE POLE. WHEN PROPERLY POUNDED TOGETHER, THE POLE SECTIONS SHOULD HAVE A 3-1/2" MINIMUM OVERLAP, LEAVING 1-1/2" BETWEEN THE OVERLAPPING POLE AND THE IDENTIFICATION STICKER.

NOTE:

POLE SECTIONS

SHOULD HAVE A

3-1/2" (9 CM)

MINIMUM

OVERLAP.

2

IDENTIFICATION		2
STICKER
	pole middle
		5"
1
		2
IDENTIFICATION
STICKER
	pole em	1-1/2"

POLE

IDENTIFICATION

MARK

1

WOOD SCRAP

(NOT SUPPLIED)

1

9 08/05 ID# M601114