Specialized CR2032 manual Trip Distance DST Trip distance mode will record up to, Odometer ODO

Km/h

FIGURE 19. TRIP DISTANCE SCREEN

Trip Distance (DST)-

Trip distance mode will record up to

999.99miles or kilometers and then roll to zero. The trip distance SET can be reset by pressing the "SET" button for three seconds. The resolution is

0.01miles (0.01 Kilometers). The trip distance is shown on the lower line if the screen. (See figure19)

26

Km/h

FIGURE 20. ODOMETER SCREEN

Odometer (ODO)-

The odometer will record the total dis- tance traveled up to 99,999 miles or kilometers and then roll to zero. The odometer can be reset by pressing the "SET" button for three seconds. The total distance is shown on the lower line if the screen. (See figure 20)

Programmable Odometer

The odometer digits are programma- ble. This is convenient for transferring your hard-earned mileage that is usu- ally lost when changing batteries or computers.

INCLINOMETER (%GRD)

The inclinometer will display the per- centage of grade you are climbing or descending in increments of 1%. A negative grade or descent is indicated by a negative sign (example –3%). Tech note: The inclinometer calculates percentage of grade by comparing the change in altitude to the distance traveled. This data is updated on the LCD display every 5 seconds and is based upon data accumulated during the previous 20 seconds. It is normal to

experience a slight delay when transi- tioning from one grade to another.

Temperature (TEMP)

Your SpeedZone® Pro is contains a thermometer. Temperature is dis- played in increments of one degree. While in "TEMP" mode, press the "SET" button to alternate between ˚C and ˚F.

Clock-

Your SpeedZone® Pro is equipped with a digital clock, which can be accessed from any other mode by pressing the "MODE" button for three seconds. The clock can be set to operate in either 12 or 24-hour mode.

27