Specialized CR2032 manual Setting the Programmable Odometer, Easy Calibration Mode

Km/h

FIGURE 11. EASY CALIBRATION MODE

3. Setting the Programmable Odometer

This mode is useful if you have replaced the battery and would like to retain the mileage you have already ridden. To access the Programmable odometer mode, first advance to the Odometer Mode by pressing "MODE"

14

button until ODO appears on the left- hand side of the screen. Note: if your display says TRIP, press the "SET" but- ton once to change to ODO. Hold down the "SET" button for three sec- onds (If you have selected English lan- guage, the Km/h indicator will flash. If the Km/h setting is correct press the "SET" button once) and a five-digit number will appear. You are now in the programmable odometer mode. To enter a mileage into the odometer, press the "MODE" button until the flashing digit is correct. (Note: The "MODE" button may be held to scroll to the correct digit.) Press the "SET" button to select the next digit to the right. Repeat this process until all five digits are entered as your existing mileage. (See figure 10)

Stem

Wheel

Circumference

FIGURE 12. ROLL OUT ILLUSTRATION.

4.Wheel Circumference Selection To set the circumference for the type of tires you are using, you can use Specialized’s "Easy Calibration Mode" or measure your actual tire circumference by the rollout method. Two different tire diameters may be entered by using the computer’s "Second Wheel Option."

Easy Calibration Mode

Your SpeedZone® Pro has been pre- programmed with the following 14

Specialized tire sizes:
26	X 1.0	26 X 2.2
26	X 1.25	650c X 20
26	X 1.5	700c X 20
26	X 1.9	700c X 23
26	X 1.95	700c X 26
26	X 2.0	700c X 32
26	X 2.1	700c X 38

When using Easy Calibration Mode, the SpeedZone® Pro will display the tire size on its LCD display screen.

(See figure 11) The Easy Calibration Mode is accessed by entering the Speed (SPEED) mode and holding down the "SET" button for three sec- onds. The display will now show the

15